Home | Family | Home Improvement
There has always been some confusion between re-pointing and tuck-pointing which has led these terms to be used interchangeably. But the truth is that both of these are quite different from each other. The main confusion is mainly caused due to the fact that the meaning of tuck-pointing in one area is different from the one used in another area of the country. This has led to a conflict in the job specification and repair expectations throughout the country. Tuck-pointing might be referred to as re-pointing which involves placing of plastic mortar in the cracks and joints to correct masonry defects. It also involves the approximation of color of the masonry unit. The masonry repair mainly involves the repairing of mortar joint. This is a very important task and thus requires an expert to handle it. Although you can ask for a certified craftsman has got proper knowledge of the latest techniques but you can also get a good idea of the skills of the craftsman through the following points. 1. Is he able to cut the mortar joints to the proper depth and avoid as much damage as possible? 2. Is he able to prepare the mortar properly for the task? 3. The mortar should be placed properly involving layering, compacting and tooling. 4. Proper care must be taken in accurately coloring the mortar so that it has the same color as the adjacent area. You can further ensure the result of the masonry repairing through critical inspection of your house. If the quality has not been maintained during the repair you can ask the repairman to redo the job. This way you can be sure that you will not face the problem for a long time. Normally, the lifespan of a building is between 25-30 years and through proper maintenance you can increase this lifespan.
Article Source: http://www.content.onlypunjab.com
For more info on Tuckpointing and Critical Inspections pls contact Thomas Dymek at 773-235-5050.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
